How to Install a Ghost Immobiliser
A ghost immobiliser is an effective deterrent for car thieves. By combining this device with other security systems and remaining alert, you can build an effective defense against the latest, technologically advanced thieves.
Ghost immobilisers can safeguard your vehicle from hotwiring, key cloning and relay car theft by the needing a pin number to start the engine. It is activated by buttons on your steering wheel or centre console, which makes it unnoticeable to thieves.
Identifying the Wires
With increasing instances of vehicles being taken away without the owner's key, it's important to protect your vehicle. Ghost immobilisers are an excellent way to add a layer of protection for your vehicle. It blocks all signals from your key fob so that it's impossible to start the car without entering a PIN.
While you can install a ghost ignition yourself, it is recommended to hire an expert technician complete the job for you. A professional technician will know where to put the unit and how to connect it to your vehicle's wiring. The installation process can be complicated and it is crucial that all connections are done correctly to avoid issues or malfunctions.
Wearing safety equipment and working in a place that is well-lit will help you get the best results. You should also read through the user manual and familiarise yourself with the wiring system. This will aid you in identifying the wires needed for the installation and make sure that you have the right tools and equipment to complete the job right.
After the wiring is connected, you are able to reconnect your battery and test to verify that the system is functioning properly. You should also make sure that the battery's connections are secure to prevent electrical issues. It is also important to label the CAN L and CAN H wires with labels or tape to be able to keep track of them during the installation process.
If you would like to allow someone else to drive your vehicle temporarily for valet parking or when your vehicle is in for service or repair, the Ghost Immobiliser can be turned on in Transport Mode. You can enter the code using the service button on the steering column, central console, or door panels. Then, Ghost 2 immobiliser will go into the mode of changing the PIN code.
Some thieves try to circumvent the ghost immobiliser using jamming or spoofing devices to block or send fake signals to the system. This can be avoided by investing in anti-jamming technologies and regularly monitoring your Ghost immobiliser to detect signs that it's been tampered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security gadget created to stop theft of cars. It makes use of cutting-edge technology to monitor and deactivate the engine when the correct PIN code is entered, thereby stopping the vehicle from being driven away by thieves. The system is highly effective and stealthy, with no visible indicators to discourage criminals. However, there may come an occasion when you have to remove the unit to perform maintenance or upgrades, or to sell your car.
This procedure requires special tools and knowledge because you'll be working with wires, and bypassing certain factory parts. It is also important to follow the step by step instructions provided by the manufacturer. It is also recommended to consult an experienced mechanic or auto electrician, particularly if you don't have any prior experience working on cars.
After identifying the wires and disconnecting them, it is important to verify the condition of your battery. Ensure that it is clean and free of corrosion and that the connections are secure. If needed, you may want to replace the battery to ensure that it is strong enough to withstand the demands of an aftermarket security system.
After you have disconnected the wiring from the battery, you are now able to begin to take out the ghost immobiliser. Wire cutters or strippers can be used to cut off the wires. Be careful not to harm the wires or their terminals. Label each wire to make it easier to reconnect them in the future. If the wires are soldered, you can use a tool that is heat-resistant to break the connection. To avoid short-circuiting, is essential to wrap the wires with insulation tape or heat shrink tubing.
Connect the wires back to the identified constant 12V power source. If required use a fuse tap to make sure that the connections are protected by a fuse. Then, connect the grounding wire to a solid grounding point on the vehicle's chassis.
Once you have reconnected the wires, turn off your vehicle and enter the code PIN. Then, restart the engine. If it does not start, the ghost immobiliser has been removed successfully.
Making the Connections
A ghost immobiliser is an affordable way to increase the security and security of your vehicle. It works by connecting to the CAN bus system in your vehicle, capturing signals and preventing the vehicle from starting until the right PIN code has been entered. This system is nearly impossible to bypass and is a great choice for motorists who want additional security and peace of mind. It can help lower the cost of insurance when combined with an Thatcham Approved Tracking System.
It is essential to obtain and study the wiring diagram for the vehicle model before you begin installing. The diagram can serve as a reference guide for locating the wires needed to create precise connections. The connection will last and secure if you choose the correct wiring connectors or soldering technique.
The wires that connect the Ghost immobiliser to the CAN bus system must be identified and connected correctly. Use small labels or tape to identify the CAN L and CAN H wires. This will prevent confusion during installation. The wires are positioned in different locations on every vehicle. It is crucial to reference the wiring diagram or online resources in order to identify the wires.
When the correct cables have been connected after connecting the correct cables, power can be restored to the Ghost immobiliser. It is a good idea to test your immobiliser. Start your engine and do not enter the code. This will ensure that the immobiliser has been installed correctly and is functioning exactly as it was intended to. It is recommended to check your immobiliser on a regular basis to aid in identifying any issues or issues early.
The ghost immobiliser is able to be installed quickly and without altering your vehicle's wiring. It's a great option for those who want to increase the security of their vehicle, as it works with an Thatcham approved tracker or alarm that will send you a message on your smartphone or tablet in the event that the vehicle is tampered with.
Mounting the Unit
The Ghost immobiliser is a great deterrent against car thieves, particularly when it is paired with the GPS tracking system. The device makes use of buttons on the central console, door panels and the steering wheel to create unique sequences that only you know to stop your vehicle from beginning. The device is also weatherproof and tamper-proof. It comes with a 3-year warranty and is recommended for use by many insurance companies.
It is crucial to follow the instructions during the installation process. While some people are comfortable handling the task by themselves, it's recommended to consult a professional if you are uncertain. Wire strippers and multimeters are essential tools to locate the wiring and make precise connections. It's also a good idea to purchase some insulation and electrical tape for protecting the connections from potential damage. Once the installation is complete, it's a good idea test the device to make sure that it's functioning as intended.
A Ghost immobiliser is an excellent option to safeguard your vehicle against theft, especially in areas with high crime. It prevents key cloning, ECU swapping, and other security risks, and can be used in conjunction with an iPhone application to make it easy to manage and monitoring. It's a favorite choice for vehicle owners looking to protect their investment. It's simple to install.
The Ghost II immobiliser is designed with a slim, low-profile design that makes it invisible to thieves. It is connected to your vehicle's CAN (Controller Area Network), and prevents you from starting the engine without entering a PIN. The PIN code can be created by pressing a number of buttons on your steering wheel or console, or on your door. It can also be changed at any time. The device is also tamper proof and includes an GPS tracker that will help police locate your vehicle in the event of theft. It's an excellent option to safeguard your car from thieves, and it's Thatcham certified.